View HSD050IDW1-AXX-0299_7307407.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 1/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. to : date : sep., 25, 2009 hannstar product specification (formal) 5.0 color tft-lcd open cell model hsd050idw1-a**-0299 note: 1. please contact hannstar display corp. before des igning your product based on this module specification. 2. the information contained herein is presented me rely to indicate the characteristics and performance of our products. no responsibility is assumed by hannstar for any intellectual property c laims or other problems that may result from application based on the module described herein. 3. the mark ** of model means sub-model code. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 2/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. record of revisions rev. date sub-model description of change 1.5 sep, 25, 2009 a20-0299 formal product specification was first released. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 3/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. contents 1.0 general description . p.4 2.0 absolute maximum ratings . p.5 3.0 optical characteristics . p.6 4.0 block diagram .. .. p.10 5.0 input interface pin assignment . p.11 6.0 electrical characteristics . p.12 7.0 reliability test items p.17 8.0 outline dimension . p.18 9.0 lot mark ... p.19 10.0 package specification . p.20 11.0 general precaution . p.22 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 4/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. general description 1.1 introduction hannstar display model hsd050idw1-a00-0299 is a col or active matrix thin film transistor (tft) liquid crystal display (lcd) that uses amorphous silicon tft as a switching device. this model is composed of a tft l cd panel, a driving circuit. this tft lcd has a 5.0 (15:9) inch diagonally measu red active display area with wvga (800 horizontal by 480 vertical pixel) resolut ion. 1.2 features 5.0 (15:9 diagonal) inch configuration 6 bits + frc driver with 1 channel ttl interface rohs and halogen-free compliance 1.3 applications personal navigation device multimedia applications and others av system 1.4 general information item specification unit outline dimension 114.8 x 73.2 x 1.43 (typ.) mm display area 108.0(h) x 64.8(v) mm number of pixel 800 rgb (h) x 480(v) pixels pixel pitch 0.135(h) x 0.135(v) mm pixel arrangement rgb vertical stripe display mode normally white free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 5/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 2.0 absolute maximum ratings 2.1 electrical absolute rating 2.1.1 tft lcd module item symbol min. max. unit note power supply voltage v dd -0.5 5.0 v gnd=0 logic signal input level v i -0.3 v dd +0.3 v note (1) permanent damage may occur to the lcd module if beyond this specification. functional operation should be restricted to the conditions described under normal operating conditions. (2) ta =252 2.2 environment absolute rating item symbol min. max. unit note operating temperature t opa -20 70 storage temperature t stg -30 80 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 6/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note vsat 2.4 (6) threshold voltage vth 1.4 (6) transmittance (with pz) t 6.78 contrast cr 480 600 (1)(2) rising t r 3 6 response time falling t f 7 14 msec (1)(3) color gamut s 50 % c light w x 0.292 0.307 0.322 white w y 0.333 0.348 0.363 rx 0.616 0.631 0.646 red ry 0.327 0.342 0.357 gx 0.306 0.321 0.336 green gy 0.538 0.553 0.568 bx 0.134 0.149 0.164 color chromaticity (cie1931) blue by =0 normal viewing angle 0.168 0.183 0.198 l 65 75 hor. r 65 75 u 50 60 viewing angle ver. d cr>10 60 70 (1)(4) cf glass c light optima view direction 6 o clock (5) 3.2 measuring condition measuring surrounding: dark room ambient temperature: 252 o c 3.3 measuring equipment fpm520 of westar display technologies, inc., which utilized sr-3 for chromaticity and bm-5a for other optical characteristics. measuring spot size: 20 ~ 21m free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 7/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (1) definition of viewing angle: note (2) definition of contrast ratio (cr): measured at the center point of panel luminance with all pixel s white cr = luminance with all pixel s black l r u d =0 o =180 o 12 oclock =90 o 6 oclock =270 o free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 8/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (3) definition of response time: sum of t r and t f note (4) definition of optical measurement setup time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 9/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (5) rubbing direction (the different rubbing d irection will cause the different optimal view direction. note (6) definition of vsat and vth (at 20 0 c) free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 10/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 4.0 block diagram 4.1 pixel format 1,1 1,800 480,800 lcd display area 2,1 1,2 1,3 1,4 480 lines 800 pixel (2400 dots) 480,1 r r r b g 1 pixel 2400 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 11/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 5.0 input interface pin assignment fpc connector is used for electronics interface. the recommended model is fh19sc-40s-0.5sh (51) manu factured by hirose. pin no. symbol i/o function 1 v led- p power for led backlight cathode 2 v led+ p power for led backlight anode 3 gnd p power ground 4 v dd p power voltage 5 r0 i red data (lsb) 6 r1 i red data 7 r2 i red data 8 r3 i red data 9 r4 i red data 10 r5 i red data 11 r6 i red data 12 r7 i red data (msb) 13 g0 i green data (lsb) 14 g1 i green data 15 g2 i green data 16 g3 i green data 17 g4 i green data 18 g5 i green data 19 g6 i green data 20 g7 i green data (msb) 21 b0 i blue data (lsb) 22 b1 i blue data 23 b2 i blue data 24 b3 i blue data 25 b4 i blue data 26 b5 i blue data 27 b6 i blue data 28 b7 i blue data (msb) 29 dgnd i digital ground 30 dclk i pixel clock 31 disp i display on/ off 32 hsync i horizontal sync signal 33 vsync i vertical sync signal 34 de i data enable 35 nc - no connect 36 gnd p power ground 37 x_r i/o right electrode - differential analog 38 y_b i/o bottom electrode - differential analog 39 x_l i/o left electrode - differential analog 40 y_t i/o top electrode - differential analog i/o: i: input, o: output, p: power free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 12/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.0 electrical characteristics 6.1 tft lcd module item symbol min. typ. max. unit note supply voltage v dd 3.0 3.3 3.6 v v ih 0.7 v dd - v dd v note (1) input signal voltage v il gnd - 0.3 v dd v note (1) current of power supply i dd - - 220 ma v dd = 3.3v note (1): hsync, vsync, de, r/g/b data note (2): gnd=0v free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 13/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.2 ac characteristics item symbol min. typ. max. unit note dclk cycle time tclk 25 ns dclk frequency fclk 33 40 mhz dclk pulse duty tcwh 40 50 60 % vsync setup time tvst 8 ns vsync hold time tvhd 8 ns hsync setup time thst 8 ns hsync hold time thhd 8 ns data setup time tdasu 8 ns data hold time tdahd 8 ns de setup time tdesu 8 ns de hold time tdehd 8 ns horizontal display area thd 800 tcph hsync period time th 928 tcph hsync width thwh 1 48 tcph hsync back porch thbp 40 tcph hsync front porch thfp 40 tcph vertical display area tvd 480 th vsync period time tv 525 th vsync width tvwh 3 th vsync back porch tvbp 29 th vsync front porch tvfp 13 th free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 14/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.3 timing diagram of interface signal tvst tvhd thst thhd th clkin vsd hsd // // // 30% 30% 30% 30% 30% 30% data 2nd data // last data 30% tdsu first data 70% tdhd 70% 30% tcph tcwl tcwh 1 2 last clkin 30% 70% 30% 30% 30% den // 70% tesu // // sampling clock timing - - - - - - - - active area (t hd ) total area (t h ) 0 2 3 4 6 5 7 - - - - - - - - hsd clk (hv mode ) (de mode) - 8 - 1 b b b b b b b b den d07~d00 h pulse width (t hpw ) r r r r r r r r h blanking (t hb ) h front porch (t hfp ) - - - - - - - - - g g g g g g g g - - - - - - - - - b b b b b b b b - - - - - - - - - g g g g g g g g - - - - - - - - - r r r r r r r r d17~d10 d27~d20 d07~d00 d17~d10 d27~d20 horizontal display timing range free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 15/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. vsd hsd tvb tvpw de tv tvd tvfp vertical timing free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 16/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.4 power sequence note (1) the supply voltage of the external system for the module input should be the same as the definition of v dd . (2) apply the lamp volatge within the lcd operation ran ge. when the back-light turns on before the lcd operation or the lcd tru ns off before the back-light turns off, the display may momentarily become white . (3) in case of vdd = off level, please keep the level o f input signal on the low or keep a high impedance. (4) tp4 should be measured after the module has been fu lly discharged between power off and on period. (5) interface signal shall not be kept at high impedanc e when the power is on. item min. typ. max. unit remark tp1 0.5 -- 10 msec tp2 0 -- 50 msec tp3 0 -- 50 msec tp4 1000 -- -- msec tp5 200 -- -- msec tp6 200 -- -- msec tp7 0.5 -- 10 msec free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 17/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 7.0 reliability test items no. item conditions remark 1 high temperature storage ta=+80 o c, 240hrs 2 low temperature storage ta=-30 o c, 240hrs 3 high temperature operation ta=+70 o c, 240hrs 4 low temperature operation ta=-20 o c, 240hrs 5 high temperature and high humidity (operation) ta=+60 o c, 90%rh, 240hrs 6 thermal cycling test (non operation) -30 o c(30min) +80 o c(30min), 200cycles 7 electrostatic discharge 200v,200pf(0 ) 1 time/each terminal 8 vibration 1.random: 1.04grms, 5~500hz, x/y/z, 30min/each direction 2. sine: freq. range: 8~33.3hz stoke: 1.3mm sweep: 2.9g, 33.3~400hz x/z: 2hr, y: 4hr, cyc: 15min 9 shock 100g, 6ms, x, y, z 3 time for each direction jis c7021, a-10 (condition a) 10 vibration (with carton) random: 0.015g^2/hz, 5~200hz -6db/octave, 200~400hz xyz each direction: 2hr 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note: there is no display function ng issue occurr ed, all the cosmetic specification is judged before the reliability stress. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 18/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 8.0 outline dimension note: general tolerance: +/- 0.3mm u unit: mm free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 19/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 9.0 lot mark 9.1 lot mark 1 2 3 4 5 6 7 8 9 10 11 12 13 code 1,2,3: hannstar internal flow control code. code 4: production location. code 5: production classification. code 6: production year. code 7: production month. code 8,9,10,11,12,13: serial number. note (1) production year year 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 mark 3 4 5 6 7 8 9 a b c note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 location of lot mark (1) the label is attached to the backside of the lc d panel. (2) this is subject to change without prior notice. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 20/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 10.0 package specification 10.1 5.0 inch open cell package free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 21/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 10.2 pallet drawings notes : 1 pallet : 30pcs cartons 1 carton : 40pcs cells 1 pallet : 1200pcs cells belt pallet free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 22/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.0 general precaution 11.1 use restriction this product is not authorized for use in life supp orting systems, aircraft navigation control systems, military systems and any other applicatio n where performance failure could be life-threatening or otherwise catastrophic. 11.2 disassembling or modification do not disassemble or modify the module. it may da mage sensitive parts inside lcd module, and may cause scratches or dust on the dis play. hannstar does not warrant the module, if customers disassemble or modify the mod ule. 11.3 breakage of lcd panel 11.3.1.if lcd panel is broken and liquid crystal sp ills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with ski n. 11.3.2. if liquid crystal contacts mouth or eyes, r inse out with water immediately. 11.3.3. if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. handle carefully with chips of glass that m ay cause injury, when the glass is broken. 11.4 electric shock 11.4.1. disconnect power supply before handling lcd module. 11.4.2. do not pull or fold the led cable. 11.4.3. do not touch the parts inside lcd modules a nd the fluorescent leds connector or cables in order to prevent electric shock. 11.5 absolute maximum ratings and power protection circuit 11.5.1. do not exceed the absolute maximum rating v alues, such as the supply voltage variation, input voltage variation, variation in pa rts parameters, environmental temperature, etc., otherwise lcd module may be dama ged. 11.5.2. please do not leave lcd module in the envir onment of high humidity and high temperature for a long time. 11.5.3. its recommended to employ protection circu it for power supply. 11.6 operation 11.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 11.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or as sembly. 11.6.3 when the surface is dusty, please wipe gentl y with absorbent cotton or other soft material. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd050idw1-a20-0299 formal specifica tion page no. 23/26 document no. revision 1.5 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.6.4 wipe off saliva or water drops as soon as po ssible. if saliva or water drops contact with polarizer for a long time, they may causes def ormation or color fading. 11.6.5 when cleaning the adhesives, please use abso rbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 mechanism please mount lcd module by using mounting holes arr anged in four corners tightly. 11.8 static electricity 11.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 11.8.2. because lcd module use cmos-ic on circuit b oard and tft-lcd panel, it is very weak to electrostatic discharge. please be careful with electrostatic discharge. persons who handle the module should be grounded t hrough adequate methods. 11.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 11.10 disposal when disposing lcd module, obey the local environm ental regulations. free datasheet http:///

▲Up To Search▲

Price & Availability of HSD050IDW1-AXX-0299

	To Download HSD050IDW1-AXX-0299 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .